Low-Poly Straight Ramp Module 3D Model (GLB)
The first flight of a modular aluminium ramp: 3.6 m at the proper 1:12, from the paving up to 300 mm, 1.50 clear between the kerbs. It is built the way the kit is — extruded planks laid across the travel with five anti-slip ribs to a plank, one-piece side rails that are kerb upstand above the deck and teal-anodised stringer below it, and a hinged toe plate where the deck gets too thin for a plank, with the nosing as a band across its lip. The stringers taper onto the ground and only the high end needs legs: short screw jacks on swivel feet. Three posts a side drop into cast shoes bolted over the kerb, and the double rail at 950 and 700 runs through tube clamps and closes into a loop at each end, so there is no cut end to catch a sleeve and the next module still butts flat. The hire tag is still stuck to the stringer.
- triangles
- 14,124
- compressed
- 50 KB
- formats
- 2
